Forklift Safety Guideline

 

If you have a forklift on your premises, you will need to consider the following points. If you truly answer any of them with “no”, you will want to consider the issue for the safety of your drivers and anyone entering the zone of the forklift travel.

 

1) Forklift operating area separated from pedestrians

2) Pedestrian access to forklift work areas restricted by barriers

3) Pedestrian walkways clearly marked and provided

4) Forklift in operation signs

5) Mirrors for drivers and pedestrians provided at all blind spots

6) Changes to workplace daily schedule communicated to ALL affected employees for forklift use

7) Forklift and tires suitable for use on all operating surfaces at this workplace

8) Seatbelt fitted to the forklift and used

9) Seat is in good shape

10) Forklift is on a regular maintenance schedule

11) Forklift is inspected and is certified each year

12) Forklift an appropriate size for the tasks

13) Forklift has a readable load chart

(read rest of the article below:)

RELATED ARTICLES::

• Back Injury Prevention Goes A Long Way
• Controlling The Dangers Of Compressed Air
• Preparing Your Business for a Bird Flu Pandemic
• Electrical Safety Is Not Shocking
• Eye Protective Selection Is Important In The Workplace
• Fall Safety Harnesses Can Kill
• The Most Overlooked Safety Event – Driving
• Starting a Safety Program for Small Business
• Selection Of Personal Protective Equipment Is Important
• Protective Glove Selection Can Be Complicated
• Preparation For Chemical Spills In The Workplace Must Be Made 
• Protect Employees From Eye Hazards
• Parking Lots Can Be Hazardous
• New Personnel Can Be A Safety Risk
• Helmets, Wearing One Could Save A Worker’s Life
• Health And Safety Is Most Likely To Be Outsourced
• Forklift Safety Guideline

14) Operators understand the load chart

15) Load chart indicate the safe capacity for different attachments and is rated for each

16) Forklift fitted with correctly operating warning devices (horn works, turn signal and brake and reverse lights work, reversing beeper)

17) Forklift has a correctly operating speed control device fitted

18) Overhead cage is fitted on the forklift

19) Forklift operators hold an appropriate certificate for operation

20) Uncertified forklift operators are directly supervised in sight of an authorized person

21) Forklift operators observe speed limits and warning signs

22) Forklift operators receive appropriate training and instruction on all models of forklifts in operation and on workplace hazards and safe work procedures

23) Forklift operators understand the requirement to report any equipment damage and forklift incidents

24) Use a pre-test checklist at the beginning of each shift

 

If you have answered “yes” to these points, congratulations on a fine job on forklift safety. If you did answer “no” to a few, just make adjustments and introduce the policies to your employees and make sure if you do have visitors on the floor, to make sure everyone knows of the safety policies. Make everyone safe.